1941 Mercury
Search Categories
- 1941 Mercury Parts
- We Specialize In stocking thousands of Quality New Reproduction Parts, along with the largest selection of Original good used and N.O.S. Original Ford Parts.
- Parts for stock Original or Hot Rods
- Early Ford Store - San Dimas, California
- www.EarlyFordStore.com
- phone (909) 305-1955
- email earlyfordstore@verizon.net
1937-1941 Tie Rod 43.5"
78-3283
Regular price $75.00 Save $-75.00/
Brand new tie rod for 1937-1941 passenger cars and pickups. This is the long rod that goes from one wheel to the other and links them together for the steering. The measurement is 43.5" inches in length. Included with the tie rod are the clamps used at the ends. Sold separately are the tie rod ends, which use part number (11A-3289) and (11A-3290).
1935-1948 Dropped Steering Arms
48-3134/5
Regular price $125.00 Save $-125.00/
Sold as a Pair.
These forged steel aftermarket bolt on steering arms fit all 1937-1948 spindles. This style arm is the kind most commonly used on 1935-1948 front ends with dropped front axles.
These steering arms bend downward, so that the steering tie rod fits below the front radius rod/wishbone. For most 4" inch dropped axles, the arms on the original Ford spindles are not long enough to be heated and bent down as far as necessary to clear the radius rod/wishbone. Many people will cut the arms off of their original spindles and use these arms for that application.
* If you require that your tie rod fit above the front radius rod/wishbone you can use our other steering arms with part number "B-3134", the arms bend upward a small amount.
* These spindles drop down 4" inches from the center of the bolt holes where they bolt to the spindle, to the bottom part of the arm, where the tie rod bolts onto them.
These forged steel aftermarket bolt on steering arms fit all 1937-1948 spindles. This style arm is the kind most commonly used on 1935-1948 front ends with dropped front axles.
These steering arms bend downward, so that the steering tie rod fits below the front radius rod/wishbone. For most 4" inch dropped axles, the arms on the original Ford spindles are not long enough to be heated and bent down as far as necessary to clear the radius rod/wishbone. Many people will cut the arms off of their original spindles and use these arms for that application.
* If you require that your tie rod fit above the front radius rod/wishbone you can use our other steering arms with part number "B-3134", the arms bend upward a small amount.
* These spindles drop down 4" inches from the center of the bolt holes where they bolt to the spindle, to the bottom part of the arm, where the tie rod bolts onto them.
Draglink / Tie Rod Coupling Sleeve
11A-3310
Regular price $14.95 Save $-14.95/